The main body, sliding block and worktable are important parts of the hydraulic press. The hydraulic cylinder is installed in the hole of the main body supporting cylinder plate. The sliding block is connected with the connecting flange of the piston rod of the main shaft cylinder, and it is guided up and down by a guide column. The lower part of the worktable is installed, and the sliding block and the worktable surface are provided with a "T"-shaped groove, which is convenient for users to fasten and install the mold.
The hydraulic system is located inside the machine body with beautiful appearance and easy operation. This series of presses are equipped with independent hydraulic and electrical control systems, using buttons for centralized control, which can realize the process and pressure forming process, and have the functions of pressure display and stroke, pressure adjustment and so on.
|
Model |
Nominal force/KN |
Effective stroke/mm |
Deepthroat/mm |
Slider speed |
Return speed |
Effective size of worktable (front and rear) |
Diameter of blanking hole |
Machine dimensions |
|
VL41-20 |
200 |
260 |
200 |
16 |
19 |
400 |
80 |
980×630×1670 |
|
VL41-40 |
400 |
260 |
220 |
19 |
25 |
400 |
100 |
1080×650×1800 |
|
VL41-63 |
630 |
280 |
240 |
13 |
17 |
450 |
120 |
1180×700×2020 |
|
VL41-100 |
1000 |
320 |
280 |
10 |
13 |
500 |
200 |
1380×800×2120 |
|
VL41-160 |
1600 |
360 |
320 |
13 |
20 |
600 |
200 |
1450×800×2240 |
|
VL41-200 |
2000 |
400 |
360 |
15 |
20 |
700 |
220 |
1850×990×2450 |
|
VL41-250 |
2500 |
400 |
420 |
15 |
20 |
800 |
220 |
1980×1090×2580 |
|
VL41-315 |
3150 |
500 |
500 |
50 |
60 |
900 |
240 |
2150×1040×3420 |
|
VL41-500 |
5000 |
500 |
600 |
50 |
75 |
1050 |
240 |
2300×1280×3640 |
Group headquarters address: Hailing, Taizhou City, Jiangsu Province
7 Taibai Road, Fenghuang Street, District
Postal Code: 225300
Service hotline: 0523-86868670 (switchboard)
Sales Hotline: 0523-86868671 (dedicated line)
Scan and pay attention
Position：
